OPERATION INSTRUCTION HOW TO ---VACUUM SEAL/SEAL ONLY
Canister button
Electric Source
Power
Sealing time
Pressure
Max Bag Size
Size
AC100-240 V / 50 Hz~60Hz
130W
5-9S
-60kpa
30cm
370X150X70mm
1.Put food items and place lid on the canister or container.
2.Connect air extraction hole of the machine and canister with vacuum hose. Fig.6
3. Make sure that there is no air leakage between the cover and he canister. Fig.7
4. When the vacuum process is complete, remove hose.
* Note: Pull Releasing Valve to open canister before put canister into Microwave.
10
Put the bag into
the clip flatly
Press the two sides of the cover
Dry- Left
Dry &Moist
Vacuum Seal
Moist- Right
1. Plug the power cord connector into the AC power connector of the machine
2. Place open end of the bag flat on the machine’s bag clippers. Fig. 1
3. Press both side of the cover, a” click” sounds means it is fastened. Fig.2
4. Adapt the mode to proper state, dry food for dry mode and indicator light is on the left,
moisture food for moisture mode and indicator is on the right. Fig.3
5. Press Vacuum Seal Button, the device will vacuum ,seal and shut off automatically. Fig.4
6. When the sealing process is completed, press release Button at both sides, lift up the
cover, remove the bag.
How to ---Vacuum Seal/Seal only
09
ENEN
To Next Page
Loading...