3-6
3.2 Description
The Matco A400 is a simple pallet wrapper of which safety, ease of use and a robust industrial design
are keywords. The machine is equipped with a powered pre-stretch system, a foil carriage with ‘simple
foil feed system’ and a foil puncture system. Due to the analogue sensor with angle compensation set-
up you save a maximum amount of foil. The machine consists of A-components, making this machine
extremely maintenance poor. The Matco A400 has a capacity of 30 pallets per hour. See the blueprint
on the next page for the machinery's measurements.
MACHINE
Rotational speed rotation arm, maximum 3 - 12 rpm
Clear height minimum 3,000 mm
Total weight approx. 500 kg
Operational temperature +0 to +45
o
C
Environment clean, dry, non-corrosive
ELECTRIC
Connection 1x230 VAC - 50 Hz, with safety ground
Operating voltage 24 V DC
Installed power approx. 1.1 kW
Insulation class IP 22
PALLET
Pallet measurements (L x W x H) Max. 1200x1000x144 mm
Loaded height (incl. pallet) min. 500 mm / Max. 2500 mm
Load outside pallet 50 mm maximum per side
Weight loaded pallet turntable Ø 1650mm min. 200 kg / Max. 1,650 kg
Weight loaded pallet turntable Ø 2000mm min. 200 kg / Max. 2,000 kg
Loading top flat