To Next Page
C
careysavannahAug 17, 2025
Why is there no power to the console on my Matrix Fitness C5x-03 Stepper Machine?
- JJulia HamptonAug 17, 2025
If there's no power to the console, first remove the front disk and check if LED D15 is lit on the LCB. If not, check the outlet for 120V. If the outlet works, replace the power cord. If LED D15 is still not lit, check for AC voltage at the LCB and replace power components if needed. If there is AC voltage, replace the LCB. Also, check if LED 2 is lit on the upper control board. If not, check the console cable at the LCB and console, and then check pins 1 and 3 on the console cable for approximately 12V. Replace the console cable if necessary. If LED 2 is lit but there's still no power, replace the console.
General