96 Matrix ETERNITY NE System Manual
3. Configure the Call Duration Control Profile number you selected for the extension. To do this,
• Click the settings button. The page opens in a new window. The page displays the parameters of the
profile you selected for the extension.
• In the new window,
• Enable Apply CDC to Internal Calls, if CDC is to be applied on internal calls. Default: Disabled.
• Enable Apply CDC for Incoming Calls received from trunks, if CDC is to be applied on incoming
external calls. Default: Disabled.
• Enable Apply CDC for Outgoing Calls, if CDC is to be applied to outgoing external calls. Default:
Disabled.
• If required, change the CDC Timer to the desired duration. The range of the timer is 0001 to 9999
seconds. Default: 160 seconds.
• Enable Disconnect Call after CDC Timer check box if you want calls to be disconnected on the expiry
of the CDC Timer. Default: Disabled.
• In the Apply CDC for calls matching with numbers column, type the external numbers on which you
want to apply CDC. You can enter as many as 99 numbers.
• In the Do Not Apply CDC for calls matching with numbers column, enter the numbers which you
want to be exempt from CDC.
• Click Submit and close the window.
Priority
1. Select a Priority from 1 to 9 for the SLT extension. Default: 5.
Each extension of the ETERNITY is assigned a Priority Level starting from 1, 2, 3... to 9, with '1' being
lowest Priority and '9' being highest Priority. Whenever an extension (phone) with higher priority calls an
extension with lower priority, a triple ring is placed on the called extension. To know more, read the feature
description “Priority”.
Personal Directory
1. Select a Personal Directory number from 01 to 50 that you want to assign to the SLT extension. Default:
None.
A Personal Directory is a list of 25 frequently dialed numbers, each of which are stored by Index number
(location code), Name and Trunk Access Codes (). The Personal Directory is necessary for using the
features “Abbreviated Dialing” and “Dial By Name”.
When a Personal Directory is assigned to an SLT, it must also be configured first.
The Personal Directory can be configured also by the extension user. Refer the topic “Abbreviated Dialing” for
instructions on configuring the Personal Directory.
To Next Page
Loading...
