164 Matrix ETERNITY NE System Manual
Door Phone
ETERNITY NE supports Door Phone. See “Door Phone” to know more about this feature and how it works.
• You will reach this page, if
• you have included Door Phone in the Pre-requisites.
• you have enabled On-Site Configuration and connected a Door Phone to the door phone port of the
system.
Configure the following parameters for the Door Phone:
1. Select a Time Table for the SLT extension. Default: System Time Table.
If you have not configured Time Table, you may do so now, by clicking the Time Table hyper link. Define
the working days, and the start and end time of the working hours for each working day.
See “Time Tables” to know more.
2. Select the mode of routing for calls landing on the Door Phone from the combo box Route Door Phone
Calls.
• Select At wish if you want the flexibility to have calls routed to a group of extensions or to an external
number, as and when you desire.
• Select As per Schedule if you want the system to route the Door Phone Calls automatically to a
landing destination phone (extension or external number) according to the time of the day: Day and
Night.
Default: At wish.
To Next Page
Loading...
