Matrix ETERNITY NE - How to Copy Parameter Values to Another CO Trunk

Matrix ETERNITY NE System Manual 189
Now that you have finished configuring the CO trunk. You may configure the next CO trunk.
1. Click the tab of the next CO trunk number.
2. Follow the same steps as described above to configure this trunk.
3. Use the Copy button to apply the same CO trunk settings you configured on this trunk.
How to copy Parameter Values to another CO trunk
1. Click the Copy button on the page of the CO trunk you wish to copy.
The Copy dialog box opens. The dialog box displays the number and name of the trunk to be copied in the
Copy from: field.
The dialog box also lists the numbers and names of the trunks to which you can copy the values under
Copy To: