Matrix ETERNITY NE System Manual 243
Network Parameters
1. Click the Network Parameters link.
The network parameters page opens.
Preferred WAN
1. Set the Preferred WAN according to the WAN interface you have used for your VoIP installation, which
may be:
•Ethernet WAN
• Wireless WAN over Mobile Port 1 and Mobile Port 2
Default: Ethernet
If you select Ethernet as Preferred WAN, you must configure the parameters: Network Connection Type,
DNS Connection Type, Dynamic DNS, Router’s Public IP Address, and Simple Traversal of UDP through
NAT (STUN).
If you select Wireless WAN Mobile 1 or Mobile 2, configure Wireless WAN parameters.
To Next Page
Loading...
