Matrix ETERNITY NE System Manual 245
DNS Connection Type
Configure the DNS related parameters as provided by your Internet Service Provider. You may consult your LAN
administrator in this regard.
1. Select DNS Connection Type as Static or Auto according to the Connection Type (IP Addressing
scheme) used by the network.
• Select Static if:
• your network uses Static IP Addressing.
• your network uses DHCP or PPPoE, but the DHCP/PPPoE server does not provide DNS
Address automatically.
If your network does not assign DNS Address automatically, set DNS Address Assignment as Static
and enter the DNS Server Address in the DNS IP Address field or the DNS Name provided by your
ISP in the DNS Domain Name field.
Select Automatic if:
• your network uses DHCP or PPPoE IP Addressing.
• the DHCP/PPPoE server of your network assigns the DNS Address automatically.
• DNS IP Address: This field will be editable only if you selected DNS Address Assignment as 'Static'.
Enter the DNS Server IP Address here. The DNS Address can be a maximum of 15 characters.
If you selected DNS Address Assignment as 'Automatic', the DNS Address assigned by the DHCP/
PPPoE server will appear here.
• DNS Domain Name: Enter DNS Domain Name if provided by your ITSP/LAN Administrator.
Otherwise, keep this field blank. The Domain Name may be a maximum of 40 characters.
Wireless WAN
If you selected Wireless WAN as your preferred WAN, configure the Wireless WAN for the Mobile port you are
using as the WAN interface. Make sure you have Internet Services enabled on the SIM present in the Mobile Port.
1. In the field Access Point, enter the access point provided by your Service Provider.
2. Enter the Dial-up Number provided to you for the internet service by your Service Provider.
To Next Page
Loading...
