Matrix ETERNITY NE - To Enable Headset Connectivity; To Cancel Auto Answer

336 Matrix ETERNITY NE System Manual
• Scroll down to select 'Phone Settings'; press Enter Key.
• Enter Your User Password (default: 1111).
• Scroll down to select 'Call Answer Type'; press Enter Key.
• You get the options:
Manual Call Answer
Auto Call Answer
• Scroll to select Auto Answer and press Enter key.
• Now select the Timer for Auto Answer from any of the options:
Answer After 1 sec (default)
Answer After 2 sec
:
Answer After 9 sec
• Press Enter Key.
To cancel Auto Answer:
• Repeat the above steps.
• Select 'Manual Answer' as the Call Answer Type.

It is recommended that Auto Answer Timer be set to at least 2 seconds.
To enable Headset Connectivity:
• Press the DSS Key assigned to Headset function
7
.
OR
• Press 'Enter' Key.
• Scroll down to select 'Phone Settings'; press Enter Key.
• Enter Your User Password (default: 1111).
• Scroll down to select 'Headset Connectivity'; press Enter Key.
• You get the options:
Headset Not Connected
Headset Connected
• Scroll to select 'Headset Connected' and press Enter key.
7. See “Phone Key Settings” under “DKP Extensions” for instructions.