394 Matrix ETERNITY NE System Manual
Call Cost Display
What’s this?
If your extension is a DKP or an Extended IP Phone, you can use the Call Cost Display feature to view the cost of
the last 10 external calls made from your extension.
The system will display the dialed numbers and the call cost for each number that it has calculated on the LCD of
your phone.
How to configure
For this feature to work, it must be enabled on the extension by the System Administrator (SA). You may enable
Call Cost Display on an extension from Jeeves or from a telephone.
To enable Call Cost Display on an extension using Gee
To enable 'Call Cost Display' for an extension:
• Enter SA mode.
• Dial command 1072-181-Extension-Flag
Where,
Extension is the Number of the DKP/Extended IP Phone
Flag is
0 for Disable
1 for Enable
By default Call Cost Display is enabled.
• Exit SA mode.
How to use
For EON & Extended IP Phone Users Only
• Press the DSS Key assigned to Call Cost Display feature.
OR
• Dial 1075.
• Scroll with the up/down navigation keys to view the cost of the last 10 calls.
• The display shows the last 10 dialed numbers and their corresponding call cost.
To Next Page
Loading...
