538 Matrix ETERNITY NE System Manual
Dial Plan
What's this?
ETERNITY NE provides Dial Plan to support On-hook Dialing on the Matrix Extended IP Phones.
Extended IP Phone users can make calls and access features, without going Off-hook from the handset, headset
or speaker.
How it works
When you are using the Matrix Extended IP Phone, you must configure the Dial Plan. During auto-configuration of
the Extended IP Phone, the ETERNITY NE assigns the Dial Plan to the phone.
The Dial Plan table stores up to 100 entries, which are stored against Index 001 to 100. Index001 is reserved for
'No Match Found'.
For each number string you configure in the Dial Plan, you must also define the digit length as Maximum Digits.
The Maximum Digits defines the number of digits to be dialed by the extension user for the phone to consider it as
end-of-dialing.
When the Extended IP Phone user dials digits, the phone compares the dialed number string with the entries in the
Dial Plan using the best match found logic.
When a match is found for the number, the phone waits for the duration of the Inter Digit Wait Timer to receive the
maximum digits defined for this number. When the maximum digits are received
39
, the phone considers it as end-
of-dialing and forwards the digits to the ETERNITY NE.
The default Dial Plan contains:
• all Access Codes in the 'Dial' state (First Digit and Maximum Digits). See "Access Codes" to know more.
• all Extension Numbers (First Digit and Maximum Digits).
• all Emergency Numbers as per configured in the Emergency Number Table.
Default Dial Plan
39. The phone will not wait for the Inter Digit Wait Timer to expire.
Index Number Maximum Digit
001 No Match Found 01
002 1#91 04
003 1#92 04
004 0 01
005 1 02
006 10 03
007 11 03
008 16 03
To Next Page
Loading...
