Matrix ETERNITY NE System Manual 577
Ring cadence is not programmable.
How it works
At the time of installation, when the System Engineer selects the “Region” (as per the geographical location of the
system), ETERNITYNE loads the country-specific Distinctive Ring Type defined for the selected Region.
Refer the topic “Default Settings” for the default Distinctive Ring Type applied to your country/region.
Demonstration of rings
It is possible to demonstrate Ring Types to users by dialing the SE commands from EON/Extended IP Phone or an
SLT.
By default, the system will play each Ring Type as demonstration for 30 seconds. The duration of demonstration
can be changed by setting the 'Tone Demo Timer' to match user preference.
How to configure
The country-specific Distinctive Ring Pattern is set automatically by the system when you select the Region Code
and issue command to default the system. However, if required, you may change the default Ring Pattern loaded
by the system.
To configure Distinctive Rings,
• Open Jeeves.
• Log in as System Engineer.
• Click Advanced Settings link.
• Click the System Parameters link to open the page.
To Next Page
Loading...
