Matrix ETERNITY NE - Last Number Redial; Live Call Supervision; Meet Me Paging; Message Wait

Mute (Cont.)
UnMute
 Speech - Flash - Dial 1052 again - Talk
Paging
 Dial 1074 - Page Zone Number - Start your Announcement
Raid
 Dialed Extension Busy? - Dial ‘5’ during Busy Tone - All the parties can hear beeps
-three way speech is established
Presence
 Dial 104 - User Password - Message
Absent : 0
Present : 1
Auto Detect : 2
Away : 3
On the Phone : 4
Do Not Disturb : 5
I am Mobile : 6
In Meeting : 7
Out for Meal : 8
Out of Office : 9
SLT/ISDN Terminal users cannot be paged.
Set ‘0’, if you do not want to receive any calls.
Last Number Redial
To make a call to the last number:
 Dial 7 - Last external number is out dialed
Live Call Supervision
 Dial 1098 - Extension number to be supervised - Confirmation Tone - Go On-Hook
 Your extension rings, observe CLI
The supervising extension must have a CLI phone.
Meet Me Paging
To answer a Paging call announced for you:
 Dial 1093 - Paging Extension number - Talk
Message Wait
Set Message Wait:
 Dial 1076 - Extension Number - 1 - Confirmation Tone - Go On-Hook
Cancel Message Wait:
 Dial 1076 - Extension Number - 0 - Confirmation Tone - Go On-Hook
Retrieve New Message:
 Dial 1077
Mute
Mute (Before Call)
 Dial 1052 - Confirmation Tone - Dial desired number
Mute (During an on-going Call)
 Speech - Flash - 1052