Safety
45
KUNDENDIENST
service@matrix-direct.net
DE
+49 (0) 1806/841090
• Keep the handles dry, clean and free of oil and grease.
15. Pull the plug out of the socket.
• When not using the power tool, before performing maintenance and
when changing tools such as saw blades, drill bits, router bits.
16. Do not leave any tool keys inserted.
• Before you switch the tool on, make sure that keys and adjusting tools
have been removed.
17. Prevent accidental start-up.
• Ensure that the switch is o when inserting the plug in the socket.
18. Use an extension cord when working outdoors.
• When outside, only use an extension cord that is approved for such use
and which is labelled accordingly.
19. Remain attentive.
• Pay attention to what you are doing. Approach work in a reasonable
manner. Do not use any power tool if you are unconcentrated, tired or
under the inuence of drugs, alcohol or medication.
20. Check the power tool for any damages.
• Before you use the power tool, the protective devices or easily damaged
parts must be carefully checked for functioning properly and as
intended.
• Check to make sure that moving parts are fully functional, that they
are not jammed and that the parts are not damaged. All parts must be
properly mounted and full conditions to ensure proper operation of
the power tool.
• Damaged protective devices and parts must be properly repaired
or replaced by an authorised workshop to the extent not otherwise
specied in the user manual.
• Damaged switches must be replaced by a customer service workshop.
• Do not use any power tools if the switch cannot be turned on and o.
21. ATTENTION!
• Using other tted tools and accessories may pose a risk of injury.
22. Have your power tool repaired by an electrical technician.
• This power tool complies with applicable safety regulations. Repairs may
only be performed by an electrician who uses original replacement parts;
GB
To Next Page
Loading...
