Before cutting
55
KUNDENDIENST
service@matrix-direct.net
DE
+49 (0) 1806/841090
Switching the saw on and off
6
7
− Switching the device on: Push the
green ON button
6
.
− Switching the device off: Push the
red OFF button
7
.
WARNING!
Risk of injury: Accidentally starting the saw may result in severe injury inflicted
by the saw blade.
• Always pull the mains plug out of the socket before you switch between the
saw functions or make any adjustments to the saw.
Transport/basic position
To transport the saw, the saw head must be locked in the bottom position. For this, the
motor must be pivoted so that the saw blade is visible at the bottom.
37
1. Pull the release lever of the saw blade
cover
37
towards you.
2. Push the saw head all the way down.
GB
To Next Page
Loading...
