Noise information
68
KUNDENDIENST
DE
+49 (0) 1806/841090
service@matrix-direct.net
Maximum cutting power/work piece dimensions
Horizontal Vertical Height Width
0° × 0° 120 mm × 50 mm
0° × 45° 120 mm × 32 mm
45° × 0° 85 mm × 50 mm
45°(L) × 45° 85 (55) mm × 32 mm
Noise information
WARNING!
Injury to health: The noise emissions can damage your ears in the event of
permanent exposure.
• Wear suitable ear protection when using the saw.
Noise emission values
Measured in accordance with DIN EN 61029-1. The noise at your workplace may exceed
85 dB (A); protective measures are necessary in this case (wear suitable ear protection).
• Sound pressure level L
pA
105.70 dB(A)
• Sound power level L
wA
118.70 dB(A)
• Uncertainty K 3 dB(A)
The aforementioned values are noise emission values and therefore, do not necessarily
represent safe values for the workplace at the same time. The correlation between
emission and immission levels cannot reliably provide for a conclusion as to whether
additional cautionary measures are necessary or not.
Factors that could affect the respective immission level present at the workplace
involve the specification of the work area, the surrounding area, the duration of
exposure, other noise sources etc.
You must also observe any divergences in national regulations with respect to the
permissible workplace levels. The aforementioned information does, however, allow
the user to better assess dangers and risks.
GB
To Next Page
Loading...
