To Next Page

To Previous Page

U30 / U50 ASSEMBLY COMPLETE!

U30 U50

SEAT ADJUSTMENT

To determine proper seat position, sit on the seat and position the ball

of your foot on the center of the pedal. Your knee should bend slightly

at the furthest pedal position. You should be able to pedal without

locking your knees or shifting your weight from side to side.

NOTE: It is recommended that you do not sit on the seat while adjusting its position.

To adjust, loosen the adjustment

knob by turning it two half turns

counterclockwise. Pull out the

knob to unlock the post, and

adjust the post up or down to

the desired setting. Release the

knob to lock in place. Turn the

knob clockwise until tightened.

Please check to be sure seat post is

locked in place before each use.

To adjust, lift up on the adjustment

lever and hold while sliding the post

up or down to the desired setting.

Release the lever to lock in place.

Please check to be sure seat post is

locked in place before each use.

HANDLEBAR POSITION

To adjust, rotate the adjustment

lever down and slide the handlebar

set to a position that puts the

handlebars within comfortable reach.

Lockthemechanism by lifting up

on the adjustment lever until tight.

ENGLISH

Matrix R50 Manual

Other manuals for Matrix R50