41 Matrix SATATYA NVR Quick Start
The SATATYA NVRX is assigned a Static IP for LAN2 Port. The administrator can assign a Static
IP address to the NVRX based on the availability. And specify the Subnet Mask and the Gateway
based on the network settings at the site.
LAN 2 option will not be available for the devices having single LAN port.
IP Assignment Mode for the LAN 2 option is Static by default and can not be changed.
Storage
You can configure the volume for the storage in NVRX. It supports different RAID levels according
to the way of storing the data in multiple physical disks interfaced to the NVRX.
RAID level is used to improve the performance of the system by load sharing and providing fault
tolerance and redundancy. This maintains redundant data which can be used to restore data on
the event of disk failure.
SATATYA NVRX Series variants supports RAID 0, RAID 1, RAID 5 and RAID 10 HDD modes.
Among all the NVRX variants, there is difference in number of available SATA interfaces and
Ethernet ports. So based on SATA interfaces, RAID level can be configured.
To Next Page
Loading...
Need help?
General
