228 Matrix SATATYA Devices Manual
Camera Type: Select the type of Camera i.e. Analog camera or IP camera
Camera Name: Enter a name for the camera in the Camera Name field.
Enable Camera: Check the Enable Camera box to activate the channel.
Log Motion Events: Check the box to generate log of events.
Motion Re-detection Delay: Select the delay value after which the motion is to be re-detected.
Contact Number: When any user views the live view using Mobile viewer. If he finds any event occurrence or any
security concern then he can make a call to the concerned person to alert or inform regarding event occurred by
dialing the specified contact number against the particular channel number.
Recording Stream: Select the recording stream as Main Stream or Sub Stream.
To Next Page
Loading...
