Matrix SATATYA NVR6408X System Manual

Matrix SATATYA Devices Manual 269
2) Registration Failed.Try Again: This message is displayed when the server fails to register the entered host
name & forwarded port.
3) Host Name is already assigned to other Device: This message is displayed when the server encounters a
request for a host name that is already registered with any other device.
In the event of specifying the host name as “qa”, the user can now access the SATATYA HVR from the Internet by
specifying the following URL in the web browser:
http://www.qa.matrixdnserv.com
DDNS
To access this functionality, go to Network Settings and Click on DDNS Client option. The DDNS Client Settings
page appears as shown below:
Enable DDNS Service: To configure the DDNS settings, Check the box to Enable the DDNS Service. The Dyndns
option appears in the DDNS Server field by default and cannot be changed as shown in the above figure.
User Name: Specify the User Name as registered in the DynDNS network.
Password: Specify the Password as registered in the DynDNS network.
Host Name: Specify the host name as registered with the DynDNS web site.
Update Interval: Specify the Update Interval in minutes.
Click on the Update button to update the DynDNS site with the current IP of the device.

Matrix SATATYA NVR6408X Specifications

General

Brand	Matrix
Model	SATATYA NVR6408X
Category	DVR
Language	English