Matrix SATATYA NVR6408X System Manual

272 Matrix SATATYA Devices Manual
TCP Server Settings
As mentioned earlier, the SATATYA HVR provides various event based user alert functionalities. This option
enables the system to send alerts to a computer which has a resident tcp server application.
In order to configure the parameters of the TCP server, select Network Settings and Click on TCP Client option.
The TCP Settings page appears as shown below.
Check the box to enable the TCP Service and configure the TCP server settings.
The following parameters need to be set:
• TCP Server - Specify the Host Name/IP Address of the TCP Server to be used for notification. For eg:
192.168.153.142
• Port - Specify the TCP Port as set on the TCP Server. For eg: 65535
Click on Test Connection button to verify the connection.
Click on Save to save the changes.
In order to use the remote control while configuring the network settings, the user needs to first perform the
binding procedure by pressing the Address key.

Matrix SATATYA NVR6408X Specifications

General

Brand	Matrix
Model	SATATYA NVR6408X
Category	DVR
Language	English