50 Matrix SATATYA Devices Manual
Power up sequence
On powering up the device, the Power LED is illuminated. The system goes through the booting process and on
completion, runs an LED test of all the LEDs on the Front panel. The system then emits a long beep to indicate the
completion of the initialization process.
It is highly recommended that the SATATYA device be connected to an Uninterruptible Power Supply
(UPS). This provides temporary backup power to operate the unit during a limited power outage. The UPS
also protects the unit from AC power fluctuations and power spikes.
Power should only be applied to the unit when all connections are completed and tested.
To Next Page
Loading...
