Matrix SATATYA Devices Manual 83
The SATATYA device network parameters can be set in the following ways:
From Local View:
• Tool bar will be displayed by hovering the Mouse on the Local Display.
• Login with the Username (default: admin) and Password (to be set at the time of first login).
• Select Settings and then click Network Settings.
From Remote View:
• Open the Browser window on the Computer
• In the address field type the default IP Address of SATATYA device.
• Install Device Client on the computer and the Device Client application will be launched.
• Login with Username (default: admin) and Password (to be set at the time of first login).
• Select Device Configuration from left pane.
• Click Network Settings.
The user needs to ensure that the computer is in the same subnet as the SATATYA device.
Login - Local Client
Enter the IP Address in the browse.
The SATATYA device login page appears as shown below:
In the login window, enter the Username (default: admin) and Password (default: admin). The following screens
appears.
To Next Page
Loading...
