8. Model Selection
a. Select the frame series the console is on. If you are unsure, check the frame serial
number sticker and refer to the Serial Number Prefix chart on the last page.
9. Machine Information
a. Press Import Serial Number button to pull the frame serial number into the console.
b. It’s important to verify from the frame stickers that it imported correctly as this will
cause reporting into Asset Management to be inaccurate.
c. Enter the unique Facility ID found on the order. If one is not found, leave Facility ID as 60
so it will still report into Asset Management.
d. Press the arrow in the upper right corner to complete FTSU and return to the Welcome
screen.
To Next Page
Loading...
