12. Update Tab
f. Connected consoles - press ‘Check for Updates’ .
g. Not connected consoles - with the current software version installed on a USB drive and
inserted into the USB port on the console, press ‘Update from USB’.
Note: This step can take some time depending on the software version already on the console. If
updating via USB, it is recommended to have 3-4 USB drives with current software installed so you can
update multiple consoles at the same time.
Section 4 - Master Console Setup
For the next steps, select 1 console that you will use as your “master console”. Once you have
completed all setup steps for the “master console”, you can export settings to other consoles via
Internet or USB.
To Next Page
Loading...
