• Reorder apps to customer preference
Internet Connected Consoles
15. Management Tab
a. From the “master console” press Site Survey. This will show you all the consoles that are online
(same network/SSID).
b. To export to the settings to all connected consoles on the list, press Select All, then press Export
Settings. You will see the status of the export until complete. If some consoles did not complete
the import, select those units and press Export Settings again.
Non-connected Consoles
16. Management Tab
a. With a USB drive in the USB port, press ‘Export Settings to USB’.
b. Once the console notifies you the export is complete, use that USB drive to import the file to all
other consoles. Go to each console, insert the USB drive to the USB port on the console and
press Exprort Setting from USB.
17. Once export/imports are complete, test the console features and cycle the power from the
frame on all machines.
To Next Page
Loading...
