Matrix U5X-04 BIKE - Troubleshooting No Resistance Issue

27
CHAPTER 8: TROUBLESHOOTING
8.11 TROUBLESHOOTING - NO RESISTANCE ISSUE
FIGURE A FIGURE BFIGURE A FIGURE B
NO RESISTANCE TROUBLESHOOTING
1) SYMPTOM:
No resistance
2) SOLUTION:
1) Check the power resistor wire connection between the power resistor and the LCB (Figure A).
2) Check if there is a resistance value by measuring amperage through the generator cable (Figure A).
- If there is not a resistance value, replace the resistor.
- If there is a resistance value, replace the LCB.