61
10.5 LEVELING THE BIKE
STABILIZING THE MATRIX U5X-04 BIKE
After positioning the bike in its intended location, check its stability by attempting to shake it side to side. Shaking or wobbling indicates that
your bike needs to be leveled. Determine which leveler is not resting completely on the floor. Loosen the nut with one hand to allow the leveler
to rotate. Rotate the left or right leveler, and repeat the adjustment as necessary until the bike is stable. Lock the adjustment by tightening the
nut against the rear foot support.
CHAPTER 10: BIKE SPECIFICATION AND ASSEMBLY GUIDE
To Next Page
Loading...
