Matrix UV Series - Host Computer and Connectivity Setup

HOST COMPUTER REQUIREMENTS
We recommend that you use provided RIP software
It is your responsibility to procure and configure computer hardware which, at the minimum, meets the software's basic computational
and data handling needs Provided RIP software is used to generate the print files which are downloaded to the Matrix
The following is the provided RIP computers suggested minimum hardware and software requirements
OPERATING SYSTEM
Windows 7 or higher
CPU
I5 Processor or Higher
OTHER SPEC
250 Gb Hard Drive
8 Gb RAM per CPU
1 Gb Graphic Card
1 USB Port
DVD-ROM drive required
Network Port TCP/IP
SITE PREPARATION GUIDE
CONECTIVITY
Type Purpose
USB Maintenance ,
Service
Network Printing
azonprinter.com MATRIX GETTING STARTED