LCD TOUCH DISPLAY
Print Menu
Settings Menu
Maintenance Menu
Print On/Off
Sets the printer in print mode , printer unit will go forward
till it reach rear EM sensor. Once in print mode user
cannot move printer forward backward.
Lamp On/Off
Turns the Auto lamp on and off [Orange button indicate
that function is on , gray button means its off.] If the auto
lamp is on , lamp will work only during the print.
Vacuum On/Off
Moving gantry up/down
Moving printer unit up/down [adjusting distance
between print head and printable object.]
Moving gantry forward/backward
Ink Levels
[once it starts blinking its time to refill bottles]
Single layer printing mode
Single layer printing mode [used when printing in inline or
just one layer] Tap to switch on 2 , 3 or infinity number of
layers
Pause
can be use to stop machine during the print to adjust
distance between print head and printable object.
PRINT MENU
Info Menu
azonprinter.com MATRIX GETTING STARTED
To Next Page
Loading...
Need help?
General