SETTING UP YOUR PRINTER
STEP 3
There are in total 6 bottles on printer , 3 on each side. Open one bottle at
the time and pour ink inside it . Stop pouring when ink level reach „throat”
of the bottle.
Do not pour ink over this level
WARNING
Do not spill any ink on bottle or any other part of the printer . In case of spill clean with soap and warm water.
Do not close lid of machine bottles to the end ,it will make vacuum and machine will not be able to pull ink .
When moving machine close the lid all the way to the end .
azonprinter.com MATRIX GETTING STARTED
To Next Page
Loading...