This document provides assembly instructions and important information for a Twin Size High Loft Bed with Bookcase + Desk.
Function Description:
The Twin Size High Loft Bed with Bookcase + Desk is a multi-functional furniture unit designed to maximize space in a room. It features a raised bed platform, a built-in bookcase, and an integrated desk underneath the bed. The loft bed is accessed via a ladder. This design is ideal for children's rooms, dorms, or smaller living spaces where combining sleeping, studying, and storage functions is beneficial. The bed is designed for single occupancy on the upper bunk.
Important Technical Specifications:
- Bed Size: Twin Size.
- Mattress Dimensions: The bed is designed to use a mattress that is 74"-75" (188cm-190cm) long and 37½"-38½" (95cm-98cm) wide.
- Mattress Thickness (Upper Bunk): The combined thickness of the mattress and foundation should not exceed 9" (23cm). The mattress surface must be at least 5" (13cm) below the upper edge of the guardrails to ensure safety.
- Age Group (Loft Beds): Intended for use by individuals 6 years and older (72 months and older).
- Age Group (Single Beds/Day Beds): Intended for use by individuals 3 years and older (36 months and older).
- Materials: The components are primarily made of wood, as indicated by the assembly diagrams showing wooden planks, rails, and posts.
- Hardware: The assembly requires various screws, bolts, nuts, and connectors, including:
- 20008 (M8*110mm) bolts
- 20357 (M8*78mm) bolts
- 20006 (M8*60mm) bolts
- 20676 (M6*80mm) bolts
- 20336 (M6*60mm) bolts
- 20141 (M6*35mm) bolts
- 20428 (M6*25mm) bolts
- 20591 (Φ6*13mm) barrel nuts
- 20615 (4mm) and 20015 (5mm) Allen wrenches
- 20648 (Φ16*17mm) barrel nuts
- 20055 (4*30mm) screws
- 20012 (3*19mm) screws
- 20010 (3*15mm) screws
- 20058 (Φ10x30mm) wooden dowels
- 20674 (457625mm) metal brackets
- 20123 (6*13mm) wooden dowels
- 20033 (11mm*11mm) wooden dowels
- 20039 (27mm*27mm) wooden dowels
- 20388 (M8*50mm) bolts
- 20139 (M8*30mm) bolts
- 20365 (8*13mm) barrel nuts
- 20408 (M6*50mm) bolts
- 20639 (14x6x1mm) washers
- 20129 (6x12x2mm) washers
- 20017 (Plate L) metal brackets
- Components: The bed system includes:
- Bed frame (headboard, footboard, side rails, slats)
- Ladder
- Bookcase unit
- Desk unit
- Various support beams and connectors.
Usage Features:
- Space-Saving Design: The integrated bookcase and desk underneath the loft bed provide a compact solution for sleeping, studying, and storage, making it ideal for smaller rooms.
- Accessibility: A ladder is provided for safe access to the upper bunk.
- Safety Rails: The upper bunk is equipped with guardrails on both long sides to prevent falls.
- Versatility: The design allows for a dedicated study area or creative space beneath the bed, with shelves for books, decor, or supplies.
- Assembly: The product requires assembly, with detailed instructions provided through diagrams and part lists. It is recommended that assembly be performed by an adult due to small parts.
Maintenance Features:
- Regular Hardware Checks: It is crucial to periodically check and tighten all bolts and hardware (e.g., every two to three months). Over time, these components may loosen with use, which can compromise the structural integrity and safety of the bed.
- Mattress Selection: When choosing a mattress for the top bunk, a low-profile mattress (ideally 5" (13cm) or a maximum of 9" (23cm)) is recommended to maximize the safety rail height and prevent falls.
- Anchoring Dressers: If large dressers are part of the room setup, they should be anchored to the wall using the provided anti-tip kit to prevent tipping hazards.
- Cleaning: While not explicitly stated, general furniture care practices such as dusting and wiping with a damp cloth would be appropriate for maintaining the finish.
- Replacement Parts: In case of damage or loss of parts, users are advised to contact the manufacturer or dealer for replacements, rather than using substitute parts.
- Safety Guidelines:
- Do not remove warning labels from the bed.
- Always use the recommended size mattress and/or mattress support.
- Ensure the mattress surface is at least 5" (13cm) below the upper edge of the guardrails.
- Children under 6 years of age should not use the upper bunk.
- Regularly inspect guardrails, the ladder, and other components for proper position, damage, and tightness of connectors.
- Prohibit horseplay on or under the bed and jumping on the bed.
- Only one person should be on the upper bunk at a time.
- Always use the ladder for entering and exiting the upper bunk.
- Consider using a night light for added safety if a child uses the upper bunk.
- Guardrails must be used on both long sides of the upper bunk.
- If the bunk bed is placed next to a wall, the full-length guardrail on that side should be positioned against the wall to prevent entrapment.
- The use of water or sleep flotation mattresses is prohibited.
- Strangulation Hazard: Never attach or hang items (e.g., hooks, belts, jump ropes) to any part of the bunk bed not designed for such use.
Need help?
General
To Next Page