OPERATING INSTRUCTIONS
1. Ensure that your surroundings, the product and your hands are dry.
2. Plug the hair dryer in.
3. Press the power button* once to turn the hair dryer on. When the product is turned on
the wind speed* and temperature* buttons will light up.
4. To turn the product off, press the power button again. If the hair dryer is not used for a
while, make sure it’s unplugged.
WIND SPEED BUTTON
1. There are three different wind speed settings which are indicated by light.
2. Press the upper button* of the wind speed button to increase the wind speed; Press the
lower button* of the wind speed button to decrease the wind speed.
TEMPERATURE SETTINGS
1. This hair dryer has 4 temperature settings:
- Cold wind, all the red lights are turned off;
- Low heat*, one red light is turned on;
- Medium heat*, two red lights are turned on;
- High heat*, three red lights are turned on;
2. Press the upper button of the temperature settings to increase the temperature; Press
the lower button of the temperature settings to decrease the temperature.
3. The cold wind can also be activated by pressing the coolshot button*. Cold air will be
delivered when the button is pressed, when releasing it will turn to its original state.
MEMORY FUNCTION
This hair dryer has a memory function that allows you to use the hair dryer with the same selected
settings as your last use.
AUTOCLEANING FUNCTION
This hair dryer features an Autocleaning function to clean its inner components. To turn on the
Autocleaning function: Turn the hair dryer OFF, carefully rotate the external filter in a
counterclockwise way and pull it out. Then hold the Coolshot button for 5 seconds.
ACCESSORIES
2 Blow nozzles (big and small).
1 Diffuser.
To Previous Page
Loading...