2. Open “Gloryfit” and select "Add Device" on the device page, then follow
the instructions on the screen.
Note:
1. During pairing process, please make sure phone bluetooth is turned on,
make sure watch is connected to phone correctly through bluetooth.
2. If the device can not be searched or are not able to connect during use,
please long press power button for 3 second to power off, and then power
on again, or go to settings on the watch to select “factory reset”, then add
new device again from your phone.
03 Operating instructions
a. Shortcut page: Slide down from main page, go to shortcut page.
To Next Page
Loading...
