Need help?Do you have a question about the MaxComm PMR WT350 and is the answer not in the manual?
General| Brand | MaxComm |
|---|---|
| Model | PMR WT350 |
| Category | Two-Way Radio |
| Language | English |
Displays current channel number, CTCSS, and DCS codes for user selection.
Shows TX/RX status, DCM, DCS, VOX, and SCAN functions.
Indicates Key Lock, Call Signal, and Vibrator functions active status.
Visual representation of remaining battery power, with low-level alerts.
Procedure for attaching and detaching the belt clip accessory.
Instructions for correctly inserting the rechargeable battery pack.
Steps for charging the WT350 batteries via desktop charger or adapter.
Information on the battery meter and tips for extending battery life.
Covers turning the unit ON/OFF and understanding transmitting range.
Instructions for changing channels and setting CTCSS sub-channels.
Details on setting DCS codes, VOX sensitivity, and using the Monitor function.
Explains the one-way transmission process and receiving signals.
Covers Call Ring Tones, vibration mode, and call alerts.
Instructions for Auto Channel Scan and selecting ring tones.
Includes Roger Beep, Key Tone, Dual Watch, and Key Lock features.
Describes how the LCD screen backlight illuminates when buttons are pressed.
Lists channels, CTCSS, output power, and communication range.
Detailed frequency assignments for each of the 8 available channels.
Caution against using the WT350 with a damaged antenna.
Safety advice for handling batteries to prevent short circuits and burns.
Warning about placing WT350 in vehicles with airbags due to deployment force.
Instructions for using WT350 in hazardous or explosive environments.
Advice to turn off WT350 near blasting operations to prevent interference.
Guidance on cleaning the WT350 using a soft cloth dampened with water.
Lists standards met by the WT350 for radio, EMC, and safety regulations.
To Next Page