Thank you for choosing MAXHUB product.
To ensure that you are able to fully utilize the capabilities of the product, we ask that you
please read this user manual carefully and thoroughly before using the device. Should you
have any questions or require assistance, please do not hesitate to contact our technical
support team for guidance.
Safety Warnings
Placement
(1) Please do NOT place the product on a slope, mount on an unstable stand or an insuiciently
robust wall, a table nor a shelf.
(2) Please do NOT expose the product to direct sunlight or any other heat source.
(3) Please do NOT put the product near devices that generate strong magnetic fields.
(4) Remove water splashes immediately with a clean dry cloth.
(5) Please do NOT place any other heavy objects on the product.
Power Supply
(1) Please check the product’s operating voltage and frequency matches the local power
configuration.
(2) Please unplug the device during storming or thundering weather.
(3) Please unplug the power should the product is left unused for long time.
(4) Please keep the power cable from physical or mechanical damage.
(5) Please use the original power cable from the accessory bag, don't modify or lengthen it.
(6) Please make sure the AC is grounded.
(7) This power cable comes with the device exclusively for this device only.
LCD Screen
(1) Do NOT use hard nor sharp objects on the screen other than MAXHUB stylus.
(2) Please unplug the power before cleaning the product.
Please clean the screen with a soft, dustless and dry cloth.
(3) Please do NOT use water or liquid detergent to clean the product.
(4) Please contact the authorised reseller for thorough cleaning.
(5) Please do NOT display a high-brightness image on the screen for too long time.
Viewing Distance
For optimal viewing experience, it is recommended to position the commercial display at a
distance that is 3-4 times the diagonal length of the screen.
Temperature & Humidity
(1) Please do NOT put the product near a heater nor a radioactive source.
(2) If the product is moved from a cold place to a warm one, please unplug the power cable
and allow the product to gradually warm up for at least two hours to reduce the moisture.
(3) Operating temperature of the product is 0°C-40°C, operating humidity is between
0%-90%RH.
(4) avoid exposing the unit to rain or placing it in high humidity areas. Additionally, it is
crucial to keep the unit in a dry and cool indoor environment.
01
To Next Page
Loading...
Need help?
General
