Do you have a question about the Maxi-Cosi Coral XP and is the answer not in the manual?
Car Seat Type | Infant Car Seat |
---|---|
Base | Included |
Harness | 5-point harness |
Product Type | Infant Car Seat |
Color Options | Multiple colors available |
Weight Capacity | 4 to 22 lbs |
Height Capacity | up to 29 inches |
Carrier Weight | 4.2 kg |
Safety Features | Side impact protection |
Handle | Ergonomic |
Product Category | Car Seat |
Safety Standards | Meets or exceeds Federal Safety Standards |
Compatibility | Compatible with Maxi-Cosi strollers |
Material | Fabric |
Function | Infant Car Seat |
Car Seat Base Compatibility | Coral XP base |
Removable Carrier Weight | 5.5 lbs |
Identifies parts of the inner carrier, including handles and straps.
Details parts of the outer carrier, such as belt guides and storage.
Illustrates the parts of the car seat base, including lockoffs and indicators.
Guidelines for using head and body pillows, including weight requirements.
Information on using harness covers and removing the buckle cover.
Importance of measuring child's weight and height before use.
Advises to follow state laws and AAP guidelines for car seat use.
Steps to detach the outer carrier from the base.
Instructions for separating the inner carrier from the outer carrier.
Specifies weight and height limits for rear-facing use.
How to loosen the car seat harness straps for child placement.
Procedures for releasing the chest clip and unbuckling the harness.
Ensuring correct head position and harness strap alignment.
Positioning the child and harness straps correctly.
Instructions for fastening the chest clip correctly.
How to buckle and snugly tighten the child's harness.
Correct chest clip placement and harness tightness verification.
Steps to remove the inner carrier for strap repositioning.
How to loosen the harness straps for adjustment.
Critical warnings about harness system use and clothing.
Removing and attaching harness strap loops to the splitter plate.
Ensuring the harness system is properly installed and undamaged.
Procedure to detach the outer carrier from the base.
Steps to securely attach the outer carrier to the base.
Instructions for operating and locking the carry handle.
Steps to separate the inner carrier from the outer carrier.
How to securely attach the inner carrier to the outer carrier.
Ways to carry the inner carrier independently or with the outer carrier.
Instructions for using the optional crossbody strap.
How to attach the crossbody strap to the carrier.
Ensuring the crossbody strap is properly positioned.
Important safety note about securing the child while using the strap.
Method to shorten the crossbody strap.
Method to lengthen the crossbody strap.
Steps to remove the crossbody strap from the carrier.
Key warnings for using the car seat as a carrier.
Details suffocation, strangulation, and fall hazards.
Instructions on what not to do with the carrier or restraint.
How to adjust the base for the correct recline angle.
Understanding the indicator for correct base angle.
Details on the optional load leg and its safety benefits.
How to position and use the load leg, with important warnings.
Explains the dual function of the release lever for lockoffs.
Steps to open and close the lockoff for belt release/tightening.
Understanding the indicators for correct belt tightening.
Reference to installation guide for LATCH system.
Reference to installation guide for vehicle belt system.
Steps to remove, store, and detach LATCH connectors and belt.
Important safety note: Do not use LATCH and vehicle belt simultaneously.
Importance of consulting the vehicle manual for belt compatibility.
Ensuring the vehicle belt can be locked securely.
Overview of base lockoff, retractor, or latch plate locking.
Using the base's lockoff to secure the vehicle belt.
Explanation of switchable and automatic locking retractors.
Information on emergency locking retractors and sliding latch plates.
How to determine if a latch plate locks the belt.
Specific vehicle belt types to avoid using with the car seat.
Specifies limits for rear-facing use with the base.
Illustrates use with Lap/Shoulder Belt, Lap Belt, and LATCH.
Warnings against front seat installation with airbags and proper belt tightening.
Ensuring child's weight, height, and fit are checked.
Load leg deployment and base angle adjustment guidance.
Steps for using the LATCH release lever to loosen and tighten belts.
Connecting LATCH connectors to vehicle anchor points.
Tightening belts by pushing base and checking indicator lights.
Manual tightness checks and load leg extension procedures.
Ensuring child's weight, height, and fit are checked.
Load leg deployment and base angle adjustment guidance.
Steps for using the release lever to thread the vehicle belt.
Correctly routing the belt through guides and buckling.
Consulting pages 35-40 and manual for belt compatibility.
Tightening belt and checking its tightness.
Rechecking base angle and carry handle locked position.
Steps to attach the outer carrier to the base.
Reference to pages for securing the child.
How to attach the inner carrier to the outer carrier.
Specifies limits for rear-facing use without the base.
Illustrates use with Lap/Shoulder Belt and Lap Belt.
Warnings against front seat installation with airbags and proper belt tightening.
Checking child's weight, height, and fit.
Securing child and attaching inner to outer carrier.
Positioning carrier rear-facing and checking level line.
Routing belt and checking vehicle belt compatibility.
Tightening belt and checking its tightness.
Rechecking base angle and carry handle locked position.
Removing inner carrier, loosening straps, and detaching loops.
Removing harness straps from the shoulder slots.
Steps to unthread the chest clip and buckle.
Pulling seat pad off bottom, top, and sides of inner carrier.
Detaching metal retainers from slots in the inner carrier and shell.
Detaching the carry handle from the seat pad slot and guide.
Steps to remove and attach the canopy to the outer carrier.
Washing instructions for seat pads, pillows, and covers.
Spot cleaning instructions for canopy and harness strap.
Spot cleaning for buckles, straps, and carriers.
Routing harness straps, buckle, and adjustment strap through pad slots.
Routing carry handles through seat pad slots.
Securing carry handles by pushing retainers down and up.
Fitting the seat pad around the top and bottom of the inner carrier.
Routing the harness strap through the hip harness slot.
Weaving straps through shell and threading buckle/clip.
Routing harness straps into shoulder slots and attaching loops.
Ensuring the harness system is properly installed and undamaged.
Information on the restraint's certification and installation on aircraft.
Criteria for replacing seat after minor or severe crashes.
Information on the car seat's expiration based on manufacture date.
Essential rules for safe use of the child restraint.
Vehicle belt checks, securing empty restraint, and airbag warnings.
Why registering the restraint is crucial for safety recalls.
Precautions to prevent the child from overheating in the seat.
How to address a sticky buckle or difficulty tightening straps.
Tips to prevent and manage harness twisting.
Details on the one-year warranty and how to make a claim.
What is not covered and guidance on purchasing from authorized retailers.
List of replaceable parts and how to order them.
Manufacturer's commitment to child safety and safe driving advice.