To Next PageTo Next Page
Need help?Do you have a question about the Maxi-Cosi Pria All-in-One and is the answer not in the manual?
General| Weight Limit | 100 lbs |
|---|---|
| Weight Range | 5-100 lbs |
| Rear-facing Weight Capacity | 5-40 lbs |
| Harness Type | 5-point harness |
| Machine Washable Fabric | Yes |
| Machine Washable Cover | Yes |
| Product Type | All-in-One Car Seat |
| Forward-facing Height Capacity | 29-52 inches |
| Installation | LATCH system, Vehicle seat belt |
| Safety Features | Side Impact Protection |
| Expiration | 10 years from date of manufacture |
| Harness Adjustment | No-rethread harness |
| Cup Holder | Yes |
Guide to measuring child's weight and height for car seat fit.
Steps to adjust car seat for proper child fitment.
Instructions for installing the car seat safely in a vehicle.
Procedures for properly securing the child in the car seat.
Identification of main car seat parts like headrest and harness.
Explanation of the car seat's harness system components.
Information on the anti-rebound bar and tether/UAS belt storage.
Guidance on using and removing harness covers and buckle cover.
Instructions for using removable cup holders and head/back pillows.
Importance of child's weight and height for mode selection.
Province laws and AAP recommendations for car seat use.
Warning about magnetic chest clip and medical devices.
Steps to loosen harness straps and unbuckle the harness.
Correct positioning for head, harness straps, and buckle.
Steps to fully loosen harness straps for adjustment.
How to adjust the headrest and harness height.
Correct positioning for head, harness straps, and buckle.
Steps for removing and relocating the buckle retainer.
Inserting retainer into slot and checking buckle security.
Adjusting buckle strap length for smaller infants.
Understanding recline positions for different modes.
How to recline and move the car seat to a more upright position.
Detailed steps for installing the anti-rebound bar.
Detailed steps for removing the anti-rebound bar.
Understanding the Universal Anchorage System (UAS) and its use.
How to store and remove the UAS belt.
Information on installing the car seat using vehicle belts.
Identifying switchable, automatic, and emergency locking retractors.
How to identify latch plates and associated warnings.
Guidelines for using the tether strap in forward-facing mode.
How to attach the tether hook to the vehicle's anchor.
Procedures for storing and adjusting the tether strap.
Options for rear-facing installation using belts or UAS.
Steps for installing the car seat with a vehicle belt.
Checking recline line and vehicle belt compatibility.
Routing, buckling, tightening belt, and checking tightness.
Rechecking the rear-facing recline level line.
Steps for installing the car seat using the UAS.
Routing UAS belt and checking the recline level line.
Tightening UAS belt and performing a final fit check.
Attaching UAS connectors to the vehicle's lower anchors.
Tightening UAS belt and verifying fit.
Rechecking the rear-facing recline level line.
Overview of forward-facing installation methods (belt/UAS).
Steps for forward-facing install with belt and tether.
Attaching tether and checking vehicle belt compatibility.
Routing, buckling, tightening belt and tether.
Checking belt tightness and securing the child.
Steps for forward-facing install with UAS and tether.
Routing the UAS belt and placing the car seat.
Ensuring flush fit and attaching tether hook.
Connecting UAS anchors and tightening the belt.
Checking UAS belt tightness and securing the child.
Positioning child and buckling the harness correctly.
Positioning chest clip and checking harness tightness.
Introduction to booster seat mode.
Steps to safely remove a child from the car seat.
Correct use of lap/shoulder belt in booster mode.
General steps for storing the harness system.
Steps for disassembling the harness system for storage.
Managing harness straps during storage.
Completing the harness system storage process.
Guidelines for proper booster seat fit for the child.
Installing with lap/shoulder belt and positioning the child.
Buckling the vehicle belt and positioning it correctly.
Initial steps for removing the seat pad.
Detailed steps for removing the headrest pad.
Removing the seat pad from the shell and harness holders.
Instructions for cleaning the seat pad and accessories.
Steps for installing the seat pad set onto the car seat.
Procedures for installing the harness system components.
Installing harness straps and attaching seat pads.
Threading harness straps and buckle through components.
Final steps for attaching harness straps.
Guidelines for using the car seat on an aircraft.
Criteria for car seat replacement and expiration date.
Transport Canada regulations for child restraints.
Guidelines for selecting the safest vehicle seating position.
Product registration and safety notice details.
Information regarding the product's warranty coverage and limitations.
Guidance for common issues like stuck buckles or twisted harnesses.
How to order replacement parts for the car seat.
Information from Dorel Juvenile Group and safety reminders.
