(1) Description
(1.2) Installing The Device
(1.2.1) Place the incubator on a level and horizontal surface.
(1.2.2) Insert the column connector of the adapter into the
device, then plug the adapter into a wall outlet.
(1.2.3) Power ON the main switch. The incubator is ready to
operate when the display becomes visible.
(1.3) Crushing a SCBI
(1.3.1) Insert one third of the way into crusher and push side-
ways to break the vile.
(2) Technical Data
Model u-test
Power supply DC, 24 V
Power 35 W
Temperature range 20°C ~ 80°C
Accuracy of the temperature ≤ ± 0.5°C
Display accuracy 0.1°C
Heating time (from 20°C to 80°C) ≤ 10min
Ambient temperature 5°C ~ 35°C
Dimensions (W×D×H) 110 mm x 150 mm x 85 mm
Weight 0.65 kg
Incubator - Manual
Manual Continues on Reverse
Display
Panel
Block
Power Switch
Power Connector
Crusher
DC 24 V
110 V
To Next Page
Need help?
General
