31
1. Warranty documents without sales date, factory name, and sales company approval
on them are not valid. In order to benefit from the warranty, a warrantydocument
should be presented.
2. After the machine has been installed and operated according to the instructions and
maintenance of the user manual, it is warranted for technicial failures which is
caused by the machine itself. The wearing down of the parts of the machine
however, is not covered.
3. The failures within the scope of warranty, and how and where these will be
resolved, will be determined by Spangenberg International B.V.
4. The warranty is only valid if all the warranty terms, installation instruction and
maintenance instructions in the user manual are fully met and complied with. The
guarantee is only valid for the warranted machine and no other right or
compensation for anything else may be claimed
5. If the information about the machine, like model number and serial numbers, are
scraped, rubbed or changed on the machine or warranty documents, the warranty is
no longer valid.
6. The warranty covers only the parts needed for the repairs of the machine within the
valid warranty period. Within The Netherlands the failures can be solved by the
technician(s) of Spangenberg International. Outside The Netherlands only the parts
needed for the repairs can be shipped to you after sending pictures of the broken
parts and warranty documents.
7. Failures in the machine may only be solved by technicians that are authorized to do
so by Spangenberg International B.V. to solve these failures. When the machine is
handled by anyone not authorized to do so, this will not be covered by the warranty.
8. Installation of the machine must also be done by authorized personnel.
9. When any problems or failure occure when using the machine u should immediately
contact an authorized service dealer.
10. The warranty does not cover failures and damages resulting from loading,
unloading and shipping which are outside the responsibility of Spangenberg
International B.V. Similarly, when the technician determines that failures and
damages have been caused by any external factors, these are not covered by the
warranty.
To Previous Page
Loading...