Need help?Do you have a question about the MaxiMist Pro Series and is the answer not in the manual?
General| Brand | MaxiMist |
|---|---|
| Model | Pro Series |
| Category | Paint Sprayer |
| Language | English |
Explains safety symbols (DANGER, WARNING, CAUTION) and lists precautions for fire, explosion, hazardous vapors, ventilation, and static electricity.
Details operational safety tips like avoiding tipping and essential grounding instructions for safe use.
Explains the components and working principle of the MaxiMist HVLP spray tanning system.
Details how to adjust the air cap for different spray patterns (horizontal, vertical, round).
Familiarizes users with the main controls of the ST302PRO spray gun: air cap, flow screw, locking ring.
Outlines the necessary preparation for clients, environment, and solution for optimal results.
Guides on how to operate the spray gun, adjust flow, and achieve the correct spray pattern.
Provides step-by-step practice instructions for setting the spray pattern and flow for optimal results.
Highlights important cautions regarding trigger lock and notes on cleaning between applications.
Addresses issues where no solution comes out despite air supply, checking cup pressurization and components.
Explains why air continually flows through the air cap even when the trigger is not pulled.
Offers solutions for excessive overspray by adjusting gun distance and fluid flow settings.
Details procedures for cleaning the spray gun after use, including using cleaner and hot water.
Explains how to remove, clean, and reassemble the fluid tip, nozzle, and needle assembly.
Describes the function of cup gasket and needle packing and when they may need replacement.
Illustrates the ST302PRO spray gun with numbered parts for easy identification.
Provides a detailed list of all parts with their corresponding numbers and descriptions.
Provides contact details for MaxiMist technical support, including phone, fax, and email.
Details the terms and conditions of the one-year limited warranty for the ST302Pro Spray Gun.
Lists what is not covered by the warranty, including misuse, neglect, and normal wear and tear.
Guides on how to adjust the spray gun to achieve a consistent 4-inch-wide spray pattern.
Explains the easiest way to achieve optimal results, including setup and practice steps.
Illustrates how spray pattern width is measured from the widest point on each outside edge.
Fixes for spitting or no solution output by adjusting flow knob setting for solution thickness.
Solutions for overspray by checking flow control settings and gun distance from skin.
Addresses running solution due to wide flow control or oversaturation, advising quick movement.
To Next Page
