dab+ your car Quick Guide
4
To Recall FM Transmitting Frequency Saved in Memory
This function allows you to set the FM transmitting frequency to a frequency saved in memory.
1. Press RESET and then the number key X (from 1 to 4) to recall FM frequency saved in memory. The
screen will show the frequency saved in memory location X (eg. 95.5 MHz) for 2 seconds. You can
press other number key X’ at this time if it is not the frequency you want.
2. After displaying the frequency for 2 seconds, the screen will show《Retuning》for 2 seconds and then
show《Done》and then the dab+ your car is retuned to the new frequency. All keys are disabled
when the FM frequency setting is in progress.
3. Now Switch the car radio to the new frequency and it will show DAB information on its new frequency.
Note: The default FM frequencies saved in memory locations 1 to 4 are 87.6MHz, 95.5MHz, 102.5MHz
and 107.9MHz, respectively.
To Save a Desired FM Transmitting Frequency to Memory
This function allows you to change the frequency saved in memory.
1. Press RESET and then ▲ or ▼ to switch the display to《FM freq?》.
2. Press ENTER to stay the current frequency.
3. Then you can press I◄◄ or ►►I to quickly move between ten different sets of FM frequency and
press ▲ or ▼ to step up or down FM frequency by 100KHz until the FM frequency matches the
desired number (eg. 95.5MHz).
4. Finally, press the number key X (from 1 to 4) and ENTER to save the desired frequency to memory.
The screen will show《FMXsaved》(X from 1 to 4).
To Set the FM Transmitting Power Level
This function allows you to change the FM transmitting power level.
1. Press RESET and then ▲ or ▼ to switch the display to《FMlevel?》.
2. Press ENTER to stay at the current FM transmitting power level.
3. Then you can press I◄◄ or ►►I to select a desired power level and the screen will show《Level H?》
(H= high),《Level M?》(M=medium), and《Level L?》(L=low) in sequence.
4. Finally, press ENTER to set the new level. The screen will show《Done》for 2 seconds.
Note: The default setting of power level is “L” (low).
To Reset System
This function allows you to perform a DAB system reset operation. It will erase all previous settings except
FM frequency for all Users saved in the system
1. Press RESET and then ▲ or ▼ to switch the display to《DAB》.
2. Press ENTER and the screen will show 《Reset…》 to indicate that system reset is in progress. All
keys are disabled during system reset.
3. The system will perform Scan the DAB/DAB+ Services (based on the last Scan type you selected)
automatically after system reset is complete.
To Restore to Factory Settings
This function allows you to perform a factory reset operation. It will erase all previous settings for all users
of the system.
1. Press RESET and then ▲ or ▼ to switch the display to 《Factory》.
2. Press ENTER and the screen will show 《Reset…》 to indicate that factory reset is in progress. All
keys are disabled during factory reset.
3. Tune the car radio to FM 87.6MHz after factory reset is complete, the screen will show《DABradio》.
To Next Page
Loading...
Need help?
General
