Maxitrol GV60 - Manual Knob Position and Light Check

46
TEST: Verify that the MANUAL knob is in the ON
position.
PROCEDURE: Visually inspect MANUAL knob
position.
RESULT: MANUAL knob should be rotated into,
the ON position. The knob will “click”
when it is engaged correctly.
INCORRECT.
MANUAL knob is not fully in
the ON position. The GV60 will
not operate properly with the
knob in this position.
CORRECT.
MANUAL knob should be
fully in the ON position.
Troubleshooting the GV60
Testing the Valve
© 2013, Maxitrol Company
f i r e - p a r t s . c o m