Maxkon WF-40S - Page 8

8
STEP E. Have two person to move the fireplace box to the wall hole.
If the appliance is fully recessed into the wall:
 Take the glass off see Figure(E). then take the the foam out off appliancesee Figure(F). Use the 4
screws(provided) to lock the appliance into wall with the existing two side flanges, see Figure(G).
STEP F. Place the front panel lock the appliance. See Figure (H)
STEP G. Fasten two screws at front both cornersFigure (I). Fireplace will be like this after installation