EasyManua.ls Logo

Maxon OD-820 - Maxon PH-350 Rotary Phaser; PH-350 Features and Overview; PH-350 Controls and Jacks

Maxon OD-820
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
PH-350
Feature of
PH-350
●MaxonACadaptorforstablepowersupply.
 
8
31
6
2
4
7
5
9
16
PH-350
1SPEED
(speedcontrolknob)
Controlsmodulationrate.Rotate
thisvolumeclockwiseformore
modulationrate.
2DEPTH
(depthcontrolknob)
Controlsmodulationdepth.Rotate
thisvolumeclockwisefordeep
modulation.
3FEEDBACK
(feedbackcontrolknob)
Controlseffectlevel.Fromcenter
position,rotatethisvolume
clockwiseformoreeffectof
ordinaryphaseshifter,and
counterclockwiseforPH-350's
characteristiceffectswithunique
modulation.
4MODE
(modeswitch)
Switchtochangenumberofstages
ofphaseshift.Maximumphasing
at10andminimumphasingat4.
5DC. IN
(powerinputjack)
AjacktoconnectACadaptor.
Setamplifier'svolumetotheminimum
beforeconnectingACadaptortoPH-350
inordernottodamageotherconnected
equipment.
6NORMAL/EFFECT
(normal/effectswitch)
Switchforeffecton/off.Stepping
onthisswitchalternatelyturns
effectson(LEDon)andoff(LED
off).
7INDICATOR
(LEDindicator)
Itlightsonwheneffectsareonand
lightsoffwheneffectsareoff.
8INPUT
(inputjack)
Inputjacktoconnecttotheoutput
ofguitar,othereffectsorrelated
equipment.
9OUTPUT A/B
(outputjack)
Outputjacktoconnecttotheinput
ofamplifierorothereffects.UseA
formonauralsound,thendrysignal
andeffectedsignalcomeout
PH-350
RotaryPhaser
FEATURESANDCONTROLS
High-endphasewithphotocoupleronphasecircuit.PH-350
provideslittledistortionandwidetonerangeaswellassmooth
phaseshift.
●With sufficient frequency response and low noise, PH-350 is
goodforLINEinputs,too.
Reliable footswitch and easy-to-see LED for trouble-free
performance.
mixed.UsebothAandBfor
stereosound,thenAgivesphase
shiftedsoundandBgivesdry
sound.
※Forstereosound,typicallybothamplifiers'
volumeshouldbesettoequallevels.
Volumeleveloftheamplifierconnectedto
"A"shouldbeincreasedalittleto
emphasizephaseshifteffect.
MAXONビンテージ取説英語2002.04.1915:36ページ16