Before using the Maxspect™ RSX LED Lighting System
1. Remove any plastic bags and packaging material protecting the fixture.
2. Never look directly at the LED bulbs when you switch on the system. Incorrect use of this
apparatus will increase eye hazard.
On Safety
1. Power Source – Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
2. Power Cord Protection – The power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them. Never take
hold of the plug or cord if your hand is wet, and always grasp the plug body when
connecting or disconnecting it.
3. Installation – Install indoor only, and use the attachments, mounting frames, hanging
kit and accessories provided and specified by the manufacturer.
On Operation
1. Operation – Always follow the operation instructions set forth in this manual when using
this Maxspect™ RSX LED Lighting System.
2. Heat – The apparatus should be situated away from heat sources such as radiators, and
do not expose to excessive heat such as sunshine, fire or the like.
3. Moisture – To reduce the risk of fire or electric shock, do not expose this apparatus to
rain, moisture, dripping or splashing.
4. Ventilation – The apparatus should be situated so that its location or position does not
interfere with its proper ventilation.
5. Magnetism – The apparatus should be situated away from equipment or devices that
generate strong magnetism.
6. Cleaning – Clean only with dry cloth.
To Next Page
Loading...
Need help?
General
