Maxton UC1A - HYDRAULIC CONTROLLERS, UC1 A, UC2 A B44; Specifications; Standard Features; Additional Standard Features UC2 AB44

1728 Orbit Way - Minden, Nevada 89423 P: 775-782-1700 F: 775-782-1701 info@maxtonvalve.com www.maxtonvalve.com

13
\\SERVER\CATALOG2019\2019CatalogRev2

JACK
TANK
PUMP

Front View
TANK
PUMP
JACK
UC1A B44 UC2A B44
Specifications Standard Features
*Maximum Flow** 360 gpm (1363 I/min)
Operating Pressure
Minimum 50 psi (3.4 bar)
Maximum 600 psi (41.5 bar)
Note:
Consult factory when applications exceed pressure ratio
over 2.5 to 1, example (Max. / Min. :280 / 100 )
Line Connections
Jack Port (flange) 2, 2 ½” NPT or Grooved
Tank Port (flange) 2, 2 ½” NPT or Grooved
Pump Port (flange) 2, 2 ½” NPT or Grooved
Gauge Ports Pump Pressure: “A” Port (1/8” NPT)
System pressure: “B” Port (1/8” NPT)
Pressure Switch: “S” Port (1/8” NPT)
Operating Temperature 80° – 150° F (26° – 65° C)
Oil Type Hyd. ISO VG 32
150 SUS @ 100° F (38° C)
Solenoid Coils Encapsulated CSA / UL Listed
Overall Dimensions
Width 13 inches (330mm) Height 12 3/8 inches (314mm)
Depth 11 1/4 inches (286mm) Weight UC1A 47 lbs, UC2A 50 lbs.
*Refer to flow Charts (pg.5 & 6)
** To insure proper valve selection please return a completed copy of our Job Specification Sheet (pg. 3) to Maxton.
HYDRAULIC CONTROLLERS, UC1A, UC2A B44
 Unit body construction.
 Steel sleeve inserts in valve body.
 Grooved or threaded line connections.
 Feedback control for stall free operation.
 Individualized adjustments.
 Integrated relief valve.
 High efficiency solenoids.
 115 VAC / 24 VDC solenoid coils.
 Factory tested prior to shipping.
 2 year limited warranty.
Additional Standard Features
UC2AB44
 Regulated Down Speed Control
.
Optional Features
 Explosion Proof Coil Cover
 3” Grooved Flanges
 Low Pressure Switch
 1/8” or 1/4” Ball Valves
 Quick Disconnect Coupling or Nipple Kit
Solenoid Coils 
 12 VDC – 120 VAC Dual Voltage Coils
 12 VDC Coils
 230 VAC Coils
 115 VDC Coils
 185 VAC Coils
UA
US UL
UT