1728 Orbit Way - Minden, Nevada 89423 P: 775-782-1700 F: 775-782-1701 info@maxtonvalve.com www.maxtonvalve.com
3
\\SERVER\CATALOG2019\2019CatalogRev2
In order to properly size and quote a valve(s) for your job, please complete all REQUIRED fields:
*Required fields
* Is this for an order? * Is this for pricing only?
* 1) Piston diameter(s):________ Single____ Dual ____ Telescopic 2 or 3 stage
* 2) Speed of the car (F.P.M.):________ * Capacity of the car: ________
* 3) No load pressure; “B” port reading static: (no load) _________ * or empty car weight:____________
* 4) Is elevator roped 1:2: Yes No * Does this job require down speed regulation: ___________
* 5) Do you require an OSV (pipe rupture or seismic safety valve) for this installation? _______________
* 6) Quantity of valves required for job: __________
If more than 1 is this for Separate Elevators.
Tandem/Dual Pump Units.
*7) If replacing a Maxton valve the serial number is:___________________________________
We Also Carry:
MAXGLIDE OIL ADDITIVE (Eliminates stick slip / chatter)
ISOLATION COUPLINGS (2”, 2.5”, 3” Grooved, 2” NPT)
TDF (Tank discharge filtration system)
SHUT OFF BALL VALVES (2”, 2.5” Grooved or NPT, 3” Grooved)
Remember: You can order on-line or size valves on our website @ www.maxtonvalve.com
24 hrs. a day, 7 days a week! For assistance contact Sales at (775) 782-1700
Name:_____________________________________________________ Phone #:__________________________________
Company Name:_____________________________________________ Fax #:____________________________________
Bill To City Address:____________________________________________________________________________________
Shipping Address:______________________________________________________________________________________
PO# or Credit Card # Name on Credit Card:________________________________
Shipping Instructions: Credit Card Expiration Date
(UPS ground service can take up to 6 business days depending on your location)
* Coil voltage on valve: □ 115VAC (RED) □ 230VAC (GREEN) □ 115VDC (BLACK)
* COMPLETE FOR UC4/ UC4M /UC4MR:
- Facing the adjustments, jack is to the:
□ Left □ Right
- Type of flanges: Pump Jack Tank
2” NPT (Thd)
2” Grooved
LowPressureSwitchYesNo(CIRCLEONE)
QuickDisconnectCoupling(1/8”NPT)YesNo
QuickDisconnectNipples(1/8”NPT)YesNo
* COMPLETE FOR UC1/UC1A/UC2/UC2A:
-The bottom port is the (circle one): PUMP / TANK Flanges:
Flanges: 2” 2.5” 3” 2” 2.5”
Grooved Grooved Grooved NPT NPT
Pump:
Jack:
Tank:
LowPressureSwitchYesNo(CIRCLEONE)
QuickDisconnectCoupling(1/8”NPT)YesNo
QuickDisconnectNipples(1/8”NPT)YesNo
+
++
+ Not recommended on UC2A
++ Not recommended on UC2
JOB SPECIFICATION SHEET
Certifications
Maxton is ISO 9001:2015 certified and
all main line products are CSAB44 and/or UL Listed.
SAFETACH2 ELEVATOR PERFORMANCE METER
Call for more information
To Next Page
Loading...
Need help?
General