Maxton UC1A - COIL SPECIFICATIONS

1728 Orbit Way - Minden, Nevada 89423 P: 775-782-1700 F: 775-782-1701 info@maxtonvalve.com www.maxtonvalve.com

81
\\SERVER\CATALOG2019\2019CatalogRev2

Current (AMPS) measured when coil is tested on a fully assembled control plate with C-Frame installed.
Part No.  Coil Color
Lead Wires
Coil Wire
Size
(AWG)
Voltage
OHMS ± 10%
Current (AMPS)
± 10%
Length (inches)
+2”, -0”
DC Resistance
At 25° C
With Leads
DC
AC
2082B0
(Dual Use)
Red 96 26
115 VAC
24.5
--
.66
24 VDC
.9 -
288980
(Dual Use)
Black 5 26
115 VAC
24.5
-- .66
24 VDC
.9 -
208000
Green 96 29 230 VAC 116 -- .230
208100
Black 96 32 115 VDC 512 .22 --
208300
Black 96 22 12 VDC 5.20 2.19 --
2080A0
Blue 96 28 185 VAC 78.2 -- .220
2082A0
(Dual Voltage)
Red 96
Yellow 23 12 VDC
4.4 2.59 --
Red 27 120 VAC
24.2 -- .650
Black N/A Common --
-- --
Set of 4 # 29082B* Set of 4 # 290800*
208100
208300
2080A0
2082A0**
115 VAC/24 VDC
Ea. # 2082B0
230 VAC
Ea. # 208000
115 VDC
12 VDC
185 VAC
12 VDC/120 VAC
288980
24 VDC
Use with EMV10
Series Valves Only
* Part # 29082B AND # 290800 COME IN SETS OF 4 WITH MULTI-COLORED LEAD WIRES. COLORS ARE RED, YELLOW, ORANGE AND BLUE.
ALL OTHERS ARE BLACK UNLESS OTHERWISE NOTED
** DESIGNED FOR USE WITH THE DOWN LEVELING SOLENOID FOR EMERGENCY (BATTERY BACKUP) LOWERING. 3-WIRE COLOR CODED
COIL SPECIFICATIONS