ii
Section 3 Section 3
Section 3 Section 3
Section 3 —
Product Specifications Product Specifications
Product Specifications Product Specifications
Product Specifications
Models and Capacities 3 - 1
Drive Configuration 3 - 1
Performance Specifications 3 - 1
Physical Dimensions 3 - 2
Power Requirements 3 - 3
Power Mode Definitions 3 - 3
Spin-up 3 - 3
Seek 3 - 3
Read/Write 3 - 3
Idle 3 - 3
Standby 3 - 3
Sleep 3 - 3
EPA Energy Star Compliance 3 - 3
Environmental Limits 3 - 3
Shock and Vibration 3 - 4
Reliability Specifications 3 - 4
Annual Return Rate 3 - 4
Quality Acceptance Rate 3 - 4
Start/Stop Cycles 3 - 4
Data Reliability 3 - 4
Component Design Life 3 - 4
EMC/EMI 3 - 5
EMC Compliance 3 - 5
Canadian Emissions Statement 3 - 5
Safety Regulatory Compliance 3 - 5
Section 4 Section 4
Section 4 Section 4
Section 4 —
Handling and Installation Handling and Installation
Handling and Installation Handling and Installation
Handling and Installation
Hard Drive Handling Precautions 4 - 1
Electro-Static Discharge (ESD) 4 - 1
Unpacking and Inspection 4 - 2
Repacking 4 - 3
Physical Installation 4 - 3
Before You Begin 4 - 4
Please Read 4 - 4
Back up. Protect Your Existing Data 4 - 4
Tools for Installation 4 - 4
System Requirements 4 - 4
Operating System Requirements 4 - 4
Hook up 4 - 4
Boot the System with MaxBlast Plus Diskette 4 - 4
Configure the Drive Jumpers 4 - 4
Installaing 5.25-inch Mounting Brackets 4 - 4
Install Hard Drive in Device Bay 4 - 5
Attach Interface and Power Cables 4 - 5
Start up 4 - 5
Set up 4 - 5
To Next Page
Loading...
